Onkyo Rc-710m Manual
ONKYO EXHIBITS NEW SMART WEARABLE PROTOTYPE AT CES 2018 UPPER SADDLE RIVER, NJ, January 10, 2018 – Onkyo today ann.
You can search a remote control code and register it to a desired REMOTE MODE button in the unit's Setup menu. 1.Press RCV and then press HOME on the remote controller.
2.With the cursors, select 'Setup', and then press ENTER. 3.With the cursors, select '8.Remote Controller Setup' - 'Remote Mode Setup' and press ENTER. 4.With the cursors, select the remote mode for which you want to search a remote control code and press ENTER to display the category selection screen. 5.With the cursors, select the target category, and then press ENTER to display the brand name input screen.
6.Select a character with the cursors and press ENTER. Repeat it to enter the first three characters of the brand name. 7.With the cursors, select 'Search', and then press ENTER. After a search is done, the list of possible brand names is displayed. If the brand name list is not displayed, select 'Not Listed' with the cursors and press ENTER to return to the brand name input screen in step 6.
8.With the cursors, select the target brand name, and then press ENTER. Once you decided the corresponding brand name, the remote control code of the brand and how to register it will be displayed on the TV screen. 9.Follow the guidance displayed on the TV screen. 10.If the component can successfully be operated with its registered remote control code, select 'OK' with the cursors and press ENTER. Only TV remote control codes can be entered for TV. Program a remote control code in accordance with the input since each button also works as the input selector. (For example, when the CD player is connected to the TV/CD jack, program the remote control code for the CD player to TV/CD) If the component cannot be operated, select 'Try Next Code' with the cursors and press ENTER to display another code.
It is possible to operate an MHL-enabled mobile device with the unit's remote controller by registering the code of the MHL-enabled mobile device below to the unit's remote controller. Operation may be unstable or incorrect depending on the mobile device used. 33101 (North American and Taiwanese models) 32910 (European, Australian and Asian models). Find the remote control code in the remote control code list. 1.Look up the for the corresponding remote control code. The codes in the Remote Control Code List are those known as of the date of publication and may be changed.
Only TV remote control codes can be entered for TV. Program a remote control code in accordance with the input since each button also works as the input selector. (For example, when the CD player is connected to the TV/CD jack, program the remote control code for the CD player to TV/CD) 2. Lexicon Pcm Native Reverb Bundle here. Press DISPLAY for 3 or more seconds while holding down the REMOTE MODE button to which you want to register the remote control code. Once you entered the input mode, the remote indicator will light.
3.With the number buttons, enter the 5-digit remote control code within 30 seconds. The registration is complete when the remote indicator flashes twice. The remote indicator flashes once slowly when registering the remote control code fails. Try the registration again.
The colored button assignment on the AV receiver's remote controller can be remapped to match that on the remote controller of the component whose remote control code you programmed to REMOTE MODE. However, you will not be able to remap the colored buttons if Zone 2 is selected.
1.Hold down the REMOTE MODE button to map and A (Red) simultaneously until the remote indicator lights (about 3 seconds). Remapping is possible only for codes included in the categories of the Remote Control Code List such as DVD player and TV. 2.Within 30 seconds, press the colored buttons from left to right, in the order you want to remap. For example, if the colored buttons on the remote controller of the other component are yellow, green, blue, and red from left to right, press the buttons on the AV receiver's remote controller in that order. Programming is complete when the remote indicator flashes twice. The remote indicator flashes once slowly when programming the remote control code fails.